GE Profile страница 3 Скачать руководство пользователя

Страница: 3 / 46

GEAppliances.com

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS

WARNING

Suffocation and child entrapment hazard.

Remove fresh-food and freezer doors from the refrigerator, prior to disposal. Failure to do so can
result in child entrapment which can lead to death or brain damage.

Child entrapment and suffocation are not problems

of the past. Junked or abandoned refrigerators are

still dangerous even if they will sit for “just a few

days.” If you are getting rid of your old refrigerator,

please follow the instructions below to help prevent

accidents.
Before You Throw Away Your Old Refrigerator or

Freezer:

Take off the fresh food and freezer doors.

Leave the shelves in place so that children may

not easily climb inside.

Refrigerants

All refrigeration products contain refrigerants,

which under federal law must be removed prior

to product disposal. If you are getting rid of an old

refrigeration product, check with the company

handling the disposal about what to do.

PROPER DISPOSAL OF YOUR OLD REFRIGERATOR

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong

(grounding) plug which mates with a standard 3-prong

(grounding) wall outlet to minimize the possibility of electric

shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified

electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it

is your personal responsibility and obligation to have it

replaced with a properly grounded 3-prong wall outlet. Do

not use an adapter.
The refrigerator should always be plugged into its own

individual electrical outlet which has a voltage rating that

matches the rating plate.

A 115 Volt AC, 60 Hz, 15- or 20-amp fused, grounded

electrical supply is required. This provides the best

performance and also prevents overloading house wiring

circuits which could cause a fire hazard from overheated

wires.
Never unplug your refrigerator by pulling on the power cord.

Always grip plug firmly and pull straight out from the outlet.
Repair or replace immediately all power cords that have

become frayed or otherwise damaged. Do not use a cord

that shows cracks or abrasion damage along its length or

at either end.
When moving the refrigerator away from the wall, be

careful not to roll over or damage the power cord.

IMPORTANT:

CONNECTING ELECTRICITY

WARNING

Electrical Shock Hazard.

Plug into a grounded 3-prong outlet

Do not remove the ground prong

Do not use an adapter

Failure to follow these instructions can result in death, fire, or electrical shock.

SAFETY (CONT.)

WARNING

Tip Over Hazard.

Built-in style models (model PYE, CYE, GYE, PWE, CWE, and ZWE) are top heavy, especially with any

doors open. These models must be secured with the anti-tip floor bracket to prevent tipping forward,

which could result in death or serious injury. Read and follow the entire installation instructions for

installing the anti-tip floor bracket packed with your refrigerator.

Содержание Profile















































Результаты поиска

Содержание Profile

Отзывы:

Похожие инструкции для Profile

Бренды по названию

Популярные бренды

GE Profile, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание Profile

Отзывы:

Похожие инструкции для Profile

Бренды по названию

Популярные бренды