GE PROFILE TCX18I, Техническое обслуживание руководство

Страница: 17 / 42

16
Transfer Bottom Hinge Bracket to the Left
* Pull out grille 1” and set it down n the floor to gain access to
hinge bracket screws.
* Using a 3/8” socket, remove the hinge bracket, screws,
plastic washer and spacer shim from the
bottom right side of the cabinet.
* Remove the plug button and screw from the bottom left side
of the cabinet and install at the bottom right.
* Reinstall the spacer shim, hinge bracket, screws and plastic
washer to the bottom left side of the cabinet.
Transfer Center Hinge Bracket to Left
* Remove the center hinge bracket and shim removing the
three screws. NOTE: Keep these screws with the
hinge bracket. They are longer screws and will be
used when installing the hinge on the other side.
* Remove the three painted screws and take washer from the
center left side of the cabinet. Screw them into the
holes on the right side, which were uncovered in Step
above.
* Place the center hinge bracket and shim over the holes at
the center left side of the cabinet. Insert the three
screws that wre removed with the center hinge
bracket in Step above, and tighten securely.
Reversing the Hardware
Transfer Top Hinge to Left
* Interchange hinge and shim at top right with two plug
buttons at top left of cabinet. Do not tighten screws
on hinge side at this time.
BOTTOM RIGHT
BOTTOM LEFT
CENTER RIGHT
CENTER LEFT