GE Profile PTWN8055MMS, Техническое обслуживание руководство

Страница: 22 / 46

– 22 –
( Continued Next Page )
Top Cover
To remove the top cover:
1. Remove the 4 Phillips-head screws (2 on each
side) that hold the back cover in place. Remove
the back cover.
2. Remove the wire twist tie, hose clamp, and
pressure sensor hose from the outer tub.
3. Remove the 2 plastic wire ties that attach the
top cover wiring harness to the inside corner of
the washer cavity.
Wire Twist Tie
Plastic Wire
Tie (1 of 2)
Hose Clamp
Pressure Sensor Hose
4. Roll up the plastic cover that protects the top
cover wire harness connectors.
Note: When installing the top cover, make sure to
roll down the plastic cover that protects the main
wire harness connectors.
5. Disconnect the 7 top cover wiring harness
connectors.
Plastic Cover
Disconnect
Disconnect