GE Profile PTW7O5 Скачать руководство пользователя страница 12

Страница: 12 / 32

49-3000295 Rev. 0

Getting started

Use a measuring cup to pour the bleach into the bleach

dispenser. Measure liquid bleach carefully and DO NOT pour

directly from the bleach bottle into the bleach dispenser.

NOTE:

The bleach dispenser is a single use dispenser and is

NOT a bulk dispense system. The maximum amount of bleach

that should be poured into this dispenser for any load should
never exceed 1 cup.

NOTE:

In the event that excessive chlorine bleach is

accidentally spilled or otherwise gets into the detergent tank,
please follow the

Detergent Tank Clean-Out

instructions in the

Care and Cleaning

section in order to minimize the possibility

for clothing damage. If only a few drops of bleach are spilled
into the detergent tank, there is no need to flush the tank.

NOTE:

In the event that detergent is accidentally spilled or

otherwise gets into the bleach opening, that detergent will

simply be used for the next wash cycle. In this case there is no
need to perform any flushing routine.

Liquid Bleach

(PTW905 and PTW900 models only)

Flex Dispense Drawer

Use this Flex Dispense Drawer for softener/conditioner, pre-wash detergent, detergent packets (laundry packs) and main detergent.

Liquid fabric softener/conditioner should be added to the far

left washer drawer compartment

. Follow the liquid fabric softener/

conditioner manufacturers recommendations for the correct amount
of softener/conditioner, based on the load size. Do not overfill

or dilute softener/conditioner as this can result in additive being

dispensed prematurely in the wash cycle. Your option selections will
determine when liquid fabric softener/conditioner is automatically

dispensed at its optimal time in the rinse cycle.

NOTE:

Fabric softener crystals should

NOT

be added to the dispenser drawer,

as they will not dispense properly.

Pre-wash detergent should

be added to the middle left
(second from left) Custom Add

compartment.

Use with SmartHQ

App. Fill for heavily soiled loads
to loosen and remove heavy soil

before starting the main cycle

selected. Refer to the SmartHQ App
for Flex Dispense capabilities.

Detergent packets (Laundry Packs) should be added to the middle right (third from left) compartment.

For best performance,

pods should be placed in the center (left to right) of the compartment and towards the front of the compartment. Avoid pushing the
pod to the rear of the compartment unless using two or more pods. Do not lean pods against the side walls of the pod compartment.

Follow the detergent manufacturers recommendations for the correct number of detergent packets for your wash load. Do not add

more detergent packets than recommended as this can result in residual detergent being leftover at the end of the cycle. Your option
selections will determine when detergent is automatically dispensed at its optimal time in the wash cycle.

NOTE:

We recommend the use of High Efficiency

laundry packs such as Tide PODS or Gain Flings. Some detergent packs

may not dispense completely at very cold temperatures or in the delicate cycle. In these cases, you may use a warmer temperature

setting to dispense harder to dissolve detergent packs.

HE detergent should be added to the far right

compartment.

Follow the detergent manufacturers

recommendations for the correct amount of detergent,
based on load size, taking care to add detergent to the

right

compartment

. Do not overfill or dilute detergent as this can