24
49-2000781 Rev. 2
Cooktop (Cont.)
Griddle
Reversible Cast-Iron:
Clean your reversible cast-iron
JULGGOHZLWKDVWLIIEUXVKDQGKRWZDWHU8VLQJVRDSLV
not recommended, and harsh detergents should never
be used as they will remove the seasoning. Rinse with
hot water and dry thoroughly. After rinsing, preseason
the griddle by applying a light coat of cooking oil to the
griddle surface. Wipe off excess oil with a paper towel.
Store in a cool, dry place.
Griddle Precautions:
Ŷ
If something has spilled under the griddle, it should
be cleaned up as soon as possible to prevent the
spill from getting baked onto the cooktop.
Ŷ
Do not allow grease to accumulate under the griddle
as it can be a fire hazard. Clean under the griddle
with hot, soapy water as soon as it is cool.
Ŷ
Do not wash your griddle in the dishwasher.
Ŷ 'RQRWFOHDQWKHJULGGOHLQWKHVHOIFOHDQLQJRYHQ
Grate Support Bumpers (on some models)
If any of the rubber grate support bumpers in the cooktop
are missing or damaged, replacement parts can be
obtained by visiting our website at
GEAppliances.com/
parts
.
To insert the new bumpers, simply place the cone-
shaped end of the bumper into the hole in the cooktop
and push down while gently twisting the bumper.
Grate Support Bumpers
Burner Grates
Manual Cleaning
Grates should be washed in hot, soapy water and
rinsed with clean water. To soften burned-on food,
place grates in a solution containing ¼-cup of
household ammonia for several hours. Afterward, scrub
grates with a plastic scouring pad soaked in hot, soapy
water. Rinse well and dry.
Self Clean Mode (on some models)
If your grates do not have rubber bumpers on their
bottom surface, they may be cleaned in the oven using
the self-clean cycle. Do not attempt to clean your grates
in the oven if your grates have rubber bumpers. Doing
so will destroy the rubber bumpers and may affect the
function of your surface burners.
3RUFHODLQFRDWHGJUDWHVPD\JUDGXDOO\GXOOLIFRQWLQXDOO\
exposed to self-clean temperatures.
,I\RXURYHQLVHTXLSSHGZLWKVHOIFOHDQEODFNUDFNV
it is recommended to follow the instructions for placing
grates on racks. If your oven is equipped with nickel-
SODWHGVLOYHUUDFNVLWLVUHFRPPHQGHGWRIROORZWKH
instructions for placing grates on the oven bottom.
Nickel-plated racks should not remain in the oven during
the self clean cycle. Doing so will tarnish the racks. If
either type of rack is left in the oven during a self-clean
cycle, the rack may become difficult to slide.
NOTE:
When placing or removing grates from the oven,
do not slide the grates on the racks or oven bottom. Doing
so could damage the enamel on the racks or oven bottom.
To self-clean your grates on self-clean racks:
,QVHUWUDFNVLQSRVLWLRQVDQGRUSRVLWLRQVDQG
2. Gently place one grate on each rack.
To self clean your grates on the oven bottom:
5HPRYHDOORYHQUDFNV
2. Gently place one grate on the center of the oven
bottom with the grate oriented in the upright position.
6WDFNUHPDLQLQJJUDWHVDVVKRZQEHORZ'RQRW
place or stack grates in any other configuration.
Once the grates are placed in the oven, operate the self-
clean cycle per the instruction in the Cleaning the Oven
section.
NOTE:
8VHFDXWLRQZKHQUHPRYLQJWKHJUDWHVIURPWKH
oven after the self-clean cycle has ended. The grates
may still be hot.
Once the self-clean cycle is complete, the grates may
carefully be removed. You may notice a white residue on
the grates. Wipe it off with a damp sponge. If white spots
SHUVLVWZHWWKHVSRQJHZLWKDVROXWLRQRIYLQHJDU
and water and wipe the grates again.
When replacing the grates on the cooktop, be sure to locate
them correctly. Grates should fit securely into the cooktop.
CARE AND CLEANING:
Cooktop
