Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
ge.com
Problem
Possible Causes
What To Do
Control signals after
You forgot to enter
•
Touch the
BAKE
pad and desired temperature or the
entering cooking time
a bake temperature
SELF CLEAN STD/LO
pad and desired clean time.
or delay start
or cleaning time.
Clock and timer
A fuse in your home may
•
Replace the fuse or reset the circuit breaker.
do not work
be blown or the circuit
breaker tripped.
Oven controls
•
See the
Using the clock and timer
section.
improperly set.
Oven light does
Light bulb is loose
•
Tighten or replace the bulb.
not work
or defective.
Switch operating light
•
Call for service.
is broken.
Oven temperature
Oven thermostat
•
See the
Adjust the oven thermostat—Do it yourself!
too hot or too cold
needs adjustment.
section.
Oven will not work
A fuse in your home may
•
Replace the fuse or reset the circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls
•
See the
Using the oven
section.
improperly set.
Plug on range is not
•
Make sure electrical plug is plugged into a live,
completely inserted in the
properly grounded outlet.
electrical outlet.
Oven too hot.
•
Allow the oven to cool to below locking temperature.
Oven will not
Oven controls
•
See the
Using the self-cleaning oven
section.
self-clean
improperly set.
“Crackling” or
This is the sound of the
•
This is normal.
“popping” sound
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking
Excessive soil.
•
Touch the
CLEAR/OFF
pad. Open the windows to
rid the room of smoke. Wait until the
LOCKED DOOR
light goes off. Wipe up the excess soil and reset the
clean cycle.
Oven door will
Oven too hot.
•
Allow the oven to cool below locking temperature.
not open after a
clean cycle
Oven not clean
The oven temperature is too
•
All the range to cool to room temperature and
after a self-cleaning
high to set a self-clean operation.
reset the controls.
cycle
Oven controls not properly set.
•
See the
Using the self-cleaning oven
section.
Oven was heavily soiled.
•
Clean up heavy spillovers before starting the
self-cleaning cycle. Heavily soiled ovens may need to
self-clean again or for a longer period of time.
25