12-Hour Shutdown
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn
OFF
this feature, follow
the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time until the
display shows
SF.
Touch the
DELAY START
pad until
no shdn
(no shut-off) appears in the
display.
Touch the
START
pad to activate the
no shut-off and leave the control
set in this special features mode.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Celsius selections.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time until the
display shows
SF.
Touch the
COOKING TIME
and
BROIL
HI/LO
pads at the same time. The
display will show
F
(Fahrenheit).
Touch the
COOKING TIME
and
BROIL
HI/LO
pads again at the same time.
The display will show
C
(Celsius).
Touch the
START
pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the
CLEAR/OFF
pad is touched. This
continual 6-second beep may be canceled.
To cancel the 6-second beep:
Touch the
BAKE
and
BROIL HI/LO
pads at the same time until the
display shows
SF.
Touch the
KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continuous beep). Touch the
KITCHEN TIMER ON/OFF
pad again.
The display shows
BEEP.
(This cancels
the one beep every 6 seconds.)
Touch the
START
pad.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
To activate this feature, follow the
steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time until the
display shows
SF.
Touch the
COOKING TIME
pad.
The display will show
Hld OFF
.
Touch the
COOKING TIME
pad again
to activate the feature. The display
will show
Hld ON
.
Touch the
START
pad to activate
the cook and hold feature and
leave the control set in this
special features mode.
Special features of your oven control.
ge.com
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
When the display shows your choice, touch the
START
pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
13