Before you call for service…
)
Troubleshooting Tips
Save time and money! Review the chart below first and
you may not need to call for service.
Co
ns
um
er
S
up
po
rt
Tro
ub
les
ho
ot
in
g T
ip
s
O
pe
ra
tin
g I
ns
tru
cti
on
s
Sa
fe
ty
In
str
uc
tio
ns
In
sta
lla
tio
n
In
str
uc
tio
ns
Problem
Possible Cause
What To Do
Dryer won’t
Control panel is asleep
•
This is normal. Press
POWER
.
operate
Dryer is unplugged
•
Make sure cord is plugged securely into a working outlet.
Controls are not set properly
•
Make sure the cycle was set correctly, close the lid and
press
START
.
Fuse is blown/circuit breaker
•
Check house circuit breakers/fuses. Replace fuses or reset
is tripped
breaker.
NOTE:
Electric dryers use two fuses or breakers.
Electronics need to be reset
•
Unplug dryer, wait 2 minutes, plug back in and press
POWER
.
START
was not pressed after
•
Press
START
.
a cycle was set
Door was opened during the
•
Close the door and reset cycle, to the beginning if necessary.
dry cycle
Press
START
.
Dryer is too cold
•
If the dryer has been exposed to temperatures below freezing
for an extended period of time, allow it to warm up before
pressing
POWER
. Otherwise, the display will not come on.
Clg in display
Exhaust duct blocked
• Check all of your exhaust ducting including transition ducts,
window
wall caps and around turns. Contact a qualified service
provider if necessary.
The following are normal sounds you may hear:
Normal Operating Sounds
Sound
Description
Thumping noise when
•
If the dryer has not been used for an extended period of time, you may hear a thumping noise
drum rotates
from temporary flat spots on the drum support rollers. The noise will go away after use.
34
