Power Break®
II
Circuit Breakers
Draw-Out Breaker Installation
frequent intervals. In this case, this procedure
may not be sufficient and additional precautions
may be necessary to protect the equipment.
Lubrication
All the areas subject to friction are liberally coated at
the factory with Mobil 28 red grease. If the contact
surfaces, the breaker power screw, and the interlock
pin are cleaned during maintenance, coat the
primary disconnect contact surfaces, the threads of the
nut or screw, and the interlock pin with Mobil 28.
6
www
. ElectricalPartManuals
. com
