GE PGB911DEJWW, Руководство пользователя

Страница: 29 / 72

49-85221
29
CARE AND CLE
ANING:
Cleaning The Door and Draw
er
Removable Warming Drawer (on some models)
NOTE: For models with an electric warming drawer,
before performing any adjustments, cleaning or
service, disconnect the range electrical power supply
at the household distribution panel by removing the
fuse or switching off the circuit breaker. Make sure the
warming drawer heating element is cool.
Most cleaning can be done with the drawer in place.
However, the drawer may be removed if further cleaning
is needed. Use soap and warm water to thoroughly clean.
To remove the drawer:
1. Pull drawer straight out
until it stops.
2. Press the left rail release
up and press the right
rail release down, while
pulling the drawer
forward and free.
To replace the drawer:
1. Place the left drawer rail around the inner left rail guide
and slide it in slightly to hook it.
2. Place the right drawer rail around the inner right rail
guide and slide it in slightly to hook it.
3. Slide the drawer all the way in.
Cleaning the Door and Drawer
Removable Storage Drawer (on some models)
The storage drawer is a good place to store cookware
and bakeware. Do not store plastics or flammable
material in the drawer.
The storage drawer may be removed for cleaning under
the range. Clean the storage drawer with a damp cloth or
sponge. Never use harsh abrasives or scouring pads.
Your storage drawer may have plastic slides (shown
to the right) or metal rails. Follow the respective
removal and replacement instructions for your model’s
configuration.
Removing the Storage Drawer:
1. Pull drawer straight out until it stops.
2. Continue to pull the drawer until it is detached from
the oven.
Replacing the Storage Drawer:
1. Rest the left drawer rail around the inner left rail guide
and slide it in slightly.
2. Place the right drawer rail around the inner right rail
guide and slide it in slightly.
2. Slide the drawer all the way in.
Cleaning the Oven Door
Cleaning the Door Interior
Do not allow excess water to run into any holes or slots
in the door .
Wipe dish soap over any baked-on spatters on the glass.
Use a single sided safety razor blade to clean it off. Then
wipe over the glass with a soapy cloth to remove any
residue and dry off.
The area outside the gasket can be cleaned with a
soap-filled plastic scouring pad. Do not rub or clean
the door gasket - it has an extremely low resistance to
abrasion.
If you notice the gasket becoming worn, frayed or
damaged in any way or if it has become displaced on the
door, you should have it replaced.
Cleaning the Door Exterior
If a stain on the door vent trim is persistent, use a mild
abrasive cleaner and a sponge-scrubber for best results.
Do not use this method on any other surface.
Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always wipe
the surface in the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel surface.
To inquire about purchasing cleaning products
including stainless steel appliance cleaner or polish,
UHDGWKH$VVLVWDQFH$FFHVVRULHVVHFWLRQVDWWKH
beginning of this manual.