GE PFSS5R, Руководство пользователя

Страница: 10 / 104

Copyright General Electric 2011
Ice Operation – Basic Logic
The new BM Ice in Door model has multiple and unique logic and calculations that are
accomplished with the board, the control settings, and feedback from thermistors.
However, the new ice door does not have its own thermistor and therefore calculations
are accomplished with input from the FF and FZ thermistors.
The new BM does utilize a dedicated blower fan to send cold air up from the freezer,
through a channel and into the ice section.
Ice Making/Harvest mode: this mode looks for water valve or dispenser action within a two
hour period of time. ( 4 minute response time) If seen, the ice section temperature should be
approximately 0° F degrees.
Ice Storage mode: if above activity is not detected, the temperature in the ice section could
raises as high as approximately 15° - 25°F.
Ice Hardening mode : this mode tries to account for high number of door openings and maintain
similar temperatures as the ice storage mode
Remember that temperature in the ice section is tied to the control settings so the
warmer the FZ section is set for, the warmer the ice section. A freezer setting below “5”
will produce the warmest ice section temperature.
NOTE: Ice stored for more than 10days could clump.