manualshive.com logo in svg

GE Osmonics Z-10000, Руководство по эксплуатации и обслуживанию, Страница: 71 / 128

Поделиться
Скачать
GE Osmonics Z-10000 Скачать руководство пользователя страница 71

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Z Series RO System by GE Osmonics 

4.6.2  BIOSAN™ Storage Procedure  

WARNING:  

It is recommended that protective gloves and eye protection be worn when handling the 
BIOSAN™.  Follow all Material Safety Data Sheet (MSDS) precautions and OSHA 
Standards.

 

WARNING: 

Label machine with appropriate warning signs such as "Do Not Use / Contains Cleaner" 
to prevent use of the RO until it is properly rinsed. 

a.  Disinfect and rinse the RO unit with an acceptable disinfectant solution.  Reference 

section 4.4, Disinfection Procedure. 

b.  Follow the operations for BIOSAN™ cleaning and do not rinse the RO unit after the 

solution has been circulated in the machine.  Reference section 4.3.1.3, BIOSAN™ 
Cleaning Procedure. 

WARNING: 

After storage, the RO unit must be completely rinsed of BIOSAN™, and a bacterial 
culture performed and interpreted before use (reference sections 4.3.1.2, Post Cleaning 
Rinse Procedure, and section 4.5, Product Water Culture Procedure).  Perform AAMI 
analysis if it has been one year or more since last done.

  

NOTE: 

The RO unit may be stored in BIOSAN

 for up to 2

 

weeks with systems utilizing thin 

film RO membranes. 

 

1238339b – 16Oct03 

4 - 27 

Routine Maintenance 

Содержание Osmonics Z-10000

































































































































Отзывы:

Нет отзывов