NX-8E CONTROL
43
LOCATION 211 - PROGRAMMING THE COMMAND/REQUEST ENABLES (4 segments of feature selection
data)
The NX-8E has the ability to perform a variety of commands asked of it by the home automation system. For example,
it is possible to allow arming and disarming of the security system, programming of the security system, or bypassing
of zones by the home automation system. Location 211 is used to select which commands, if any you wish the home
automation system to have access. Consult the home automation application information and enable the appropriate
commands for your application. CAUTION: IT IS IMPORTANT TO UNDERSTAND THE CAPABILITES OF THE
HOME AUTOMATION SYSTEM TO AVOID COMPROMISING THE SECURITY OF YOUR SYSTEM WHEN
PROGRAMMING THIS LOCATION.
Segment 1:
DATA
SUPPORTED REQUEST / COMMAND
1
Reserved
2
Interface Configuration Request
3
Reserved
4
Zone Name Request
5
Zone Status Request
6
Zones Snapshot Request
7
Partition Status Request
8
Partitions Snapshot Request
Segment 2:
DATA
SUPPORTED REQUEST / COMMAND
1
System Status Request
2
Send X-10 Message
3
Log Event Request
4
Send Keypad Text Message
5
Keypad Terminal Mode Request
6 - 8
Reserved
Segment 3:
DATA
SUPPORTED REQUEST / COMMAND
1
Program Data Request
2
Program Data Command
3
User Information Request with PIN
4
User Information Request without PIN
5
Set User Code Command with PIN
6
Set User Code Command without PIN
7
Set User Authorization Command with PIN
8
Set User Authorization Command without PIN
Segment 4:
DATA
SUPPORTED REQUEST / COMMAND
1
Reserved
2
Reserved
3
Store Communication Event Command
4
Set Clock / Calendar Command
5
Primary Keypad Function with PIN
6
Primary Keypad Function without PIN
7
Secondary Keypad Function
8
Zone Bypass Toggle
