Cut-out dimensions:
Height: 34
1
/
2
″
(876 mm) minimum
Width: 23
3
/
4
″
(603 mm) minimum
Depth: 24
″
(610 mm)
Installation
dimensions
The outdoor/indoor refrigerator can be
a free-standing model or can be built in
using the cut-out dimensions below.
When building in the outdoor/indoor
refrigerator, be sure to allow for a full
door swing so you have full access to the
pull-out full extension drawers.
See the Installation Instructions (Pub. No.
31-51542) for complete directions.
36
″
(914 mm)
(with top
canopy)
23
3
/
4
″
(603 mm)
23
3
/
4
″
(603 mm)
Product dimensions:
Height with
canopy: 36
″
(914 mm)
Height without
canopy: 34
1
/
2
″
(876 mm)
Width: 23
3
/
4
″
(603 mm)
Depth: 23
3
/
4
″
(603 mm)
NOTE:
Handle and
handle standoff
depth is 2
3
/
4
″
Top canopy
removal
The top canopy may be removed when
installing under a countertop.
The door MUST BE closed when
removing or replacing the top canopy.
To avoid damage, the top canopy must
clear the left hinge center locking plate
and right hinge.
•
Remove the 3 screws from the back of
the top canopy (A).
•
Using heavy-duty work gloves, lift up
on the top canopy back (B) and slide
it forward until it unlatches from the
unit (C).
•
Lift the top canopy up and off of
the unit.
NOTE:
Keep the top canopy and screws
for future free-standing installations.
NOTE:
When installing the unit in a
free-standing configuration, the top
canopy must be left in place.
CAUTION:
Under side edges
of the stainless steel canopy top may be
sharp. Wear heavy-duty work gloves when
moving the top.
14
(A)
(B)
(C)
Built-In Dimensions
Outdoor/Indoor Refrigerator
NOTE:
Door MUST BE
closed before removing or
replacing the top canopy.
