Loading
tips and
suggestions
The bottom two full extension drawers
hold five bottles each and are loaded
with necks facing the rear. Tall bottles
should not be loaded on the bottom
drawer because they may prevent the
door from closing.
• Do not block the thermistor,
located on
the right-hand side, just above the third
shelf of the outdoor/indoor refrigerator.
Blocking the thermistor could impair the
air circulation and temperature control.
Bottom drawer arrangement
Removing
full
extension
drawers
The bottom full extension drawers pull
out so bottles can conveniently be added
or removed.
The upper full extension slide can be
removed for magnums or larger bottles.
To remove:
1.
Pull the full extension drawer out to
the STOP position.
2.
Push the tab on right drawer guide
down while pulling the tab on left
guide up, and pull the drawer out.
To replace:
1.
Push the drawer slide arm back into
the unit.
2.
Pull the small slide sub-assembly
completely forward.
3.
Insert the sides of the drawer back
into the guides.
4.
Push until the tabs lock into place.
Tab (push tab down on right
drawer guide, pull tab up on
left drawer guide)
Wood
drawer
fronts
The full extension drawer fronts on
the outdoor/indoor refrigerator are
unfinished cherry wood. During use,
oil from hands may accumulate and
stain the wood.
•
The drawer fronts may be stained and
sealed to match adjacent cabinetry.
•
Apply the stain and sealer according to
the manufacturer’s instructions. To avoid
unpleasant odor, keep the door open to
ventilate and allow the stain/sealer to
dry completely before using the product.
NOTE:
Natural wood may vary slightly in
grain and color.
NOTE:
Make sure the tabs on the full
extension drawer guides are fully engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and
push back in several times to make sure
locking tabs are properly engaged.
To replace, push drawer slide
arm back into unit
Pull small slide sub-assembly
completely forward
Appearance may vary
11
Controls and Features
Outdoor/Indoor Refrigerator
Sub-assembly
Sub-assembly
