GE MDS ORBIT ECR Скачать руководство пользователя страница 158

Страница: 158 / 463

158

MDS Orbit MCR/ECR Technical Manual

MDS 05-6632A01, Rev. F

Set Default Snapshot



Identifier

– The user snapshot that should be used by the system as a recovery point if the unit fails

to boot properly due to a configuration issue.

Status

Navigate to

System->Troubleshooting->Status.

Figure 3-80 Snapshots status menu



Identifier –

The snapshot’s name.



Description –

The snapshot’s description.



Date –

This is the date that the snapshot was created.



Version –

This is the firmware version that the unit was running at the time the snapshot was

created.



User Default -

Specifies the default user snapshot used in error recovery.

Using the CLI

Rollback to a snapshot

You can rollback to one of the unit’s snapshots in either operational or configuration mode.

Use the following command to rollback the unit to the configuration stored in the Auto snapshot, and
reboot to the current active image.

Содержание MDS ORBIT ECR
















































































































































































































































































































































































































































































Результаты поиска

Содержание MDS ORBIT ECR

Отзывы:

GE MDS ORBIT ECR, Техническое руководство, Страница: 158 / 463

Результаты поиска

Содержание MDS ORBIT ECR

Отзывы: