MapSight User Manual
Page 38
www.gemapsight.com/support
MS-101-14-12-34.0
If the photo is too light and the target cannot be
distinguished,
press the Left key to darken the photo.
The camera will click, and depending on camera settings,
will either show the review screen or revert to the Target
Position task selection screen
With the review screen enabled the screen will display a
static image of the target photo and the instrument time at
time of capture. You can tap the:
Information icon (top-left) to access
geospatial data about the target
Green ‘back’ arrow (bottom-right) to retake
the target. This will return to the preview
screen.
The information screen will provide instrument readings in
regards to the local (MapSight) position, target position and
other instrument readings.
Tap the Next button to save the target and continue.
Where there is a successful recording a green tick will
appear alongside the task.
From here the information can be abandoned (tap the
Home
button), retaken (tap
Target Position
again to delete
the photo and re-enter the video preview), and data entered
into non-mandatory Label and Comment fields.
Tap the
Label
task button to enter the Label entry screen.
Tap the
Comment
task button to enter the Comment
entry screen.
Tap the
Save
button to save the target without
Label/Comments recorded and return to the Home screen.
Tap the
Home
button to abandon the target and delete the
recorded data.
