MapSight User Manual
Page 31
www.gemapsight.com/support
MS-101-14-12-34.0
Laser Settings
This screen allows you to view and change the settings in relation
to the way the laser rangefinder functions.
The
Laser Mode
options controls the selection between always on
(Streaming) or single target (One Shot) mode.
•
The ‘Streaming’ option is the default setting for where the laser
is continually firing and providing a live range distance to
target. This option is enabled by default.
•
The ‘One Shot’ option causes the laser rangefinder to attempt
to determine a distance only when the ‘Capture’ button is press.
Where ‘One Shot’ Laser Mode has been selected, the capture
preview Distance value will be shown as ‘Single’.
WARNING!
Regardless of which the Laser Mode is
selected the laser rangefinder emits a pulse that may
cause infrared transmission detectors (e.g. speed
camera detectors) to be activated.
The
Measurement Units
option controls the selection between
recording distance measurement units.
•
‘Feet’ option displays measured distance in feet and inches and
records in decimal feet (e.g. displayed 4’6” will record as 4.5).
This option is enabled by default.
•
‘Meters’ option displays and records measured distance in
decimal meters.
The capture preview and review screens will present the measured
range in the ‘Distance’ panel
