MapSight User Manual
Page 117
www.gemapsight.com/support
MS-101-14-12-34.0
Resetting the device
Some programs require you to reset your device when you install them. Follow the steps below
to reset MapSight:
1.
Back up your files and close any open applications. (For instructions on backing up
files, see ‘Backing up data’.)
2.
Press the power button until the power button menu appears.
3.
Choose Reset.
Note:
If your device locks up, you can reset the device by pressing the power button for 10
seconds or until the screen goes dark. The device resets itself automatically after a few
seconds.
Exploring files
To explore files stored on your MapSight, follow these steps:
Tap
Start > Programs > File Explorer
. The File Explore window appears.
If the drive you want does not already appear, tap on the
drop-down menu arrow to select it, as shown here.
Navigate the file directory by tapping on the folders and
files you want. If you want to go up a level, tap on the
Up soft key at the bottom of the screen.
Use the Menu soft key at the bottom of the screen to
manipulate files.