GE MAC 1600, Руководство оператора

Страница: 111 / 162

System Configuration
2028451-182B MAC™ 1600 9-19
NOTE
For treadmills and ergometers, you reset to factory defaults at
the protocol level. Refer to step 15.
12. Repeat step 8 through step 10 as necessary.
13. To rename the protocol, do the following:
a. Press F4 ( Edit Name ).
The Edit Name window opens.
NOTE
This option is not available when editing a Master Step
protocol.
b. Change the name as appropriate.
c. Press F6 ( OK ).
The protocol’s name is changed.
14. When you are done with the stages, press F6 ( Save ).
This saves your changes and returns you to the previous window.
15. To remove custom protocols, press F5 ( Factory Defaults ).
16. When the protocol is done, press F6 ( Return ).
The protocol is saved and you return to the Select Protocol window.
Communication Setup
The Communication Setup function allows you to define:
„
Basic communication settings
„
Shared directory settings
„
Destination location settings
„
Modem settings (if a modem option is activated)
„
LAN settings (if a LAN option is activated)
To reach the Communication Setup from the MAC 1600 Main Menu ,
press F5 ( System Configuration ) > F6 ( More ) > F1 ( Communication
Setup ).
The following table describes the settings on Communication Setup .
Field Comment
Page 1
Default Location Determines which of the four available communication
locations will be the default. The locations are defined on
page 2 of Communication Setup.