GE KTD-400, Руководство пользователя

Страница: 9 / 28

5
KTS-41 system control
Wiring the KTD-300R to control a KTS-41A system involves connecting the RS-422 input cable (if used), the
RS-422 output cable (if used), the DTMF output cable (to the KTS-41A), and the 12 VDC wall transformer
(
Figure 6 ).
Figure 6. KTD-300R connections with KTS-41A control
Power-up
After you make all the connections, the KTD-400 or KTD-300R will be ready for operation. Plug the 12 VDC
wall transformer into a power outlet. The LCD window will briefly display keypad setting information
(
Figure 7 on page 6), then it will enter the operating mode.
Terminal strip
RS-422 control signal in
RS-422 control signal out
12 VDC wall
transformer
KTD-300R keypad
DTMF to KTS-41A