ALIGNING THE WALL PLATE
D
Draw a vertical
line on wall
from center of
top cabinet
Area E
Hole A
Hole B
Hole D
Hole C
CAUTION:
Wear gloves
to avoid cutting fingers
on sharp edges.
Installation Instructions
Draw a vertical line on the wall at the center of the
30
″
wide space.
Use the mounting plate
as the template
for the rear
wall. Place the mounting plate on the wall, making sure
that the tabs are
touching the bottom of the cabinet or
the level line drawn in Step C for cabinets with front
overhang. Line up the notch and center line on the
mounting plate to the center line on the wall.
While holding the mounting plate with one hand,
draw circles on the wall at holes A, B, C and D
(see illustration above/actual plate marked with
arrows).
Four holes must be used for mounting.
NOTE:
Holes C and D are inside area E. If neither
C nor D is in a stud, find a stud somewhere in area E
and draw a fifth circle to line up with the stud. It is
important to use
at least one wood screw
mounted
firmly in a stud
to support the weight of the oven.
Set the mounting plate aside.
Drill holes on the circles. If there is a stud, drill a
3
⁄
16
″
hole for wood screws. For holes that don’t line up
with a stud, drill a
5
⁄
8
″
hole for toggle bolts.
NOTE: DO NOT MOUNT THE PLATE AT
THIS TIME.
4
3
2
1
10
