GE JSP38GP, Инструкция по использованию и уходу

Страница: 26 / 36

OPERATING THE SELF-CLEANING OVEN
(continued)
After a Clean Cycle
When the clean cycle is finished, the word “CLEAN”
After a clean cycle, you may notice some white ash in
will go out in the display and the oven will begin to
the oven. Just wipe it up with a damp cloth. If white
cool. When the oven temperature has fallen below the
spots remain, remove them with a soap-filled steel
locking temperature, the word “LOCK” goes out and
wool pad. Be sure to rinse thoroughly with a vinegar
the door can be opened.
and water mixture. These deposits are usually a salt
residue that cannot be removed by the clean cycle.
If the oven is not clean after 1 clean cycle, the cycle
may be repeated.
How to Delay Start of Cleaning
Quick Reminder:
1. Prepare the oven for cleaning.
2. Press the CLEAN pad.
3. Press the INCREASE pad.
4. Press the STOP TIME pad.
The time that appears is 3 hours later than the
time of day. Press the INCREASE pad until the
Stop Time you desire appears in the display.
The self-clean cycle will automatically begin
3 hours before the Stop Time you select.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
For example: Let’s say it’s and you want the
oven to begin self-cleaning at after you’re
finished in the kitchen. The oven is just soiled a
normal amount so the normal Clean Time
3 hours
is preferred.
1. Prepare the oven for cleaning,
2. Close the oven door.
3. the CLEAN u
CLEAN
n
4. Press the INCREASE pad.
6. Press the STOP TIME pad.
STOP
appears in the display and
TIME “STOP TIME” flashes.
The control automatically sets the Stop Time by
adding the Clean Time to the time of day. In this
example, the time of day is
and the Clean
Time is 3 hours. Adding 3 hours to the time of day
equals
7. Change Stop Time from to by pressing
the INCREASE pad until “12:00” appears
in the display. The words “DELAY CLEAN” will
—
also appear in the display.
The self-clean cycle will automatically begin at
and finish at
The word “ON” will appear in the
display at
When the oven locks, the word “LOCK” will be
displayed and the door will be locked in position.
It will not be possible to open the oven door until
the temperature drops below the lock temperature.
When the clean cycle is finished, the word “CLEAN”
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below
the locking temperature, the word “LOCK” goes out
and the door can be opened.
8. When the LOCK light is off open the door.
(continued next
5. Clean Time for heavy soil can be set for
4 hours. If a longer or shorter Clean Time is
desired, press the INCREASE or DECREASE pad
until the desired Clean Time is displayed.
26