GE JS905, Руководство по установке

Страница: 9 / 20

9
Installation Instructions
Electrical Connections
cont.
4
3-WIRE POWER CORD
INSTALLATION
WARNING:
The neutral or
ground wire of the power cord must
be connected to the neutral terminal
located in the center of the terminal
block. The power leads must be
connected to the lower left and the
lower right terminals of the terminal
block.
A
Remove the 3 lower terminal screws
from the terminal block. Insert the 3
terminal screws through each power
cord terminal ring and into the lower
terminals of the terminal block. Be
certain that the center wire (white/
neutral) is connected to the center lower
position of the terminal block. Tighten
screws securely into the terminal block.
DO NOT remove the ground strap
connection.
Terminal block
(appearance
may vary)
Ground
plate
Power cord
Ground
strap
Neutral
terminal
B
Skip to Step 8 and proceed with the
installation.
5
4-WIRE POWER CORD
INSTALLATION
WARNING:
The neutral wire of
the supply circuit must be connected
to the neutral terminal located in the
lower center of the terminal block.
The power leads must be connected
to the lower left and the lower right
terminals of the terminal block. The
4th grounding lead must be connected
to the frame of the range with the
ground plate and the ground screw.
A
Remove the 3 lower terminal screws from
the terminal block. Remove the ground
screw and ground plate and retain them.
Cut and discard the ground strap. DO
NOT DISCARD ANY SCREWS.
Insert the one ground screw into the
power cord ground wire terminal ring,
through the ground plate and into the
frame of the range.
Insert the 3 terminal screws (removed
earlier) through each power cord
terminal ring and into the lower
terminals of the terminal block. Be
certain that the center wire (white/
neutral) is connected to the center lower
position of the terminal block. Tighten
screws securely into the terminal block.
E
Skip to Step 8 and proceed with the
installation.
or
Terminal
block
B
C
D
Ground strap
Ground
strap
Neutral
terminal
Before
After
Terminal
block
Ground
screw
Ground
plate
(grounding
to range)