GE JP392R, Инструкция по использованию и уходу

Страница: 11 / 20

BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT: Save these instructions for the
local electrical inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
NOTE TO INSTALLER: Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER: Keep this Use and
Care Guide and Installation Instructions for
future use.
NOTE: This appliance must be properly
grounded.
LIST
●
Two
hold-down screws
●
Two clips
●
Cooktop
. Two drip trays
. Two 1/2” mounting screws
TOOLS AND YOU WILL NEED
●
Junction box with flexible conduit
connector
Phillips screwdriver
●
Carpenter square
●
Pencil
●
Ruler or tape measure and straight edge
●
Sabre saw
STEP 1
INSTALLER-PLEASE FILL IN MODEL
AND SERIAL NUMBERS
The model and serial numbers of your cooktop
are found on a tag on the underside of your
cooktop. They are also located under the air vent
grille, on the right side. Copy the numbers for
future reference.
MODEL NO.
SERIAL NO.
ELECTRICAL REQUIREMENTS
CAUTION: FOR PERSONAL SAFETY
REMOVE HOUSE FUSE OR OPEN
CIRCUIT BREAKER BEFORE BEGINNING
INSTALLATION.
A WARNING: The cooktop
has the frame grounded by
connection of grounding
(green) lead to neutral (white)
lead for use with a three conductor
branch circuit as shown in Step 5.
If used in a mobile home or if local
codes do not permit grounding
through the neutral reconnect as a
four conductor branch circuit as shown
in Step 6.
This appliance must be supplied with the proper
voltage and frequency, as noted on rating plate and
connected to an individual, properly grounded
branch circuit.
a circuit breaker or
time delay rating-plate is located on the
bottom of the cooktop chassis.
Wiring must conform to the requirements of
the National Electric Code. If the electric service
provided does not meet the above specifications,
call a licensed electrician.
11