SURFACE CLEANING
Glass Ceramic Cooktop Cleaning
Cleaning of glass ceramic cooktops is different from
cleaning a standard porcelain finish. To maintain and
protect the surface of your new glass ceramic cooktop
follow these basic steps.
Before
use the cooktop for the first time, clean it
with Cook Top Cleaning Creme. This helps protect
the top and makes clean-up easier.
DAILY CLEANING: Use only Cook Top Cleaning
Creme on Glass Ceramic.
For normal, light soil:
Rub a few drops (less is better) of Cook Top
Cleaning Creme onto the soiled area using a damp
paper towel. Wipe until all soil and creme are
removed. Frequent cleaning leaves a protective
coating which is essential in preventing scratches
and abrasions.
2. Clean the surface with Cook Top Cleaning Creme
after each use.
For heavy, burned on soil:
1. Apply a few drops of Cook Top Cleaning Creme
to the (cool) soiled area.
2. Using a damp paper towel, rub creme into the
burned on area. As with any burned on spill,
this may require some effort.
3. Carefully scrape remaining soil with the razor
scraper. Hold the scraper at a 30° angle against the
ceramic surface.
4. If any soil remains, repeat the steps listed above.
For additional protection, after
soil has been
removed, polish the entire surface with the Cook
Top Cleaning Creme.
5. Buff with a dry paper towel.
NOTE:
●
Using a razor scraper will not damage the surface
if the 30° angle is maintained.
Special Care:
Sugary spillovers (such as jellies, fudge, candy
syrups) or melted plastics can cause pitting of the
surface of your cooktop (not covered by the warranty)
unless the spill is removed while still hot. Special
care should be taken when removing hot
substances. Follow these instructions carefully and
remove the soil while the spill is still hot.
1. Turn off all the surface units affected by the
spillover. Remove hot pans.
2. Wearing an oven mitt, hold the razor
scraper at a 300 angle to the cooktop
“’
and
the hot spill to a
outside the surface unit.
3. With the spill in a cool area, use a dry paper towel to
remove any excess. Any spillover remaining should
be left
the surface of the cooktop has cooled.
Do not continue to use the soiled surface unit until all
of the spillover has been removed. Follow the steps
under Heavy Soil to continue the cleaning process.
General Information:
As
the Cook Top Cleaning Creme cleans, it
leaves a protective coating on the cooktop surface.
This coating helps to prevent build-up of mineral
deposits (water spots) and will make future cleaning
easier. Dishwashing detergents remove this protective
coating and therefore make the cooktop more
susceptible to staining.
To conveniently order more creme and/or
scrapers for cleaning your radiant cooktop,
please call our toll free number:
National Parts Center
800-626-2002
Creme 10 oz.
# WB02X8273
Scraper
# WX5X1614
Creme and scraper kit
# WB64X5027
●
Be sure to use a new, sharp razor scraper.
not use a dull or nicked blade.
●
Store the razor scraper out of reach of children.
PRECAUTIONS
●
Most cleaners contain ammonia, chemicals and
●
If pots with a thin overlay of aluminum, copper
abrasives which can damage the surface of your
or enamel are allowed to boil dry, the overlay may
cooktop. Use only the Cook Top Cleaning Creme
bond with the glass ceramic and leave a black
for proper cleaning and protection of your glass
discoloration. This should be removed immediately
ceramic surface.
before heating again or the discoloration may
●
you slide aluminum or copper cookware across
be permanent.
the surface of your cooktop, they may leave metal
●
Use of
window cleaner may leave an iridescent
markings which appear as scratches. If this should
film on the cooktop. Cook Top Cleaning Creme
happen, use the razor scraper and Cleaning Creme to
will remove this discoloration.
remove these markings. Failure to remove these
residues immediately may leave permanent marks.
Read and follow all instructions and warnings
●
Water stains (mineral deposits) are removable using
on Cook Top Cleaning Creme labels.
C k Top Cleaning Creme or full strength white vinegar
