![GE JKS10 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/ge/jks10/jks10_owners-manual_129991012.webp)
12
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Special features of your oven control.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous 6
second beep may be canceled.
To cancel the 6 second beep:
Press the
Bake
and
Broil Hi/Lo
pads
at the same time for 3 seconds until
the display shows
SF.
Press the
Kitchen Timer On/Off
pad. The display shows
CON BEEP
(continuous beep). Press the
Kitchen Timer On/Off
pad again. The
display shows
BEEP.
(This cancels the
one beep every 6 seconds.)
Press the
Start
pad.
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Press the
Bake
and
Broil Hi/Lo
pads
at the same time for 3 seconds until
the display shows
SF.
Press the
Clock
pad once. The
display will show
12 hr.
If this is the
choice you want, press the
Start
pad.
Press the
Clock
pad again to change
to the 24 hour military time clock. The
display will show
24 hr.
If this is the choice
you want, press the
Start
pad.
Press the
Clock
pad again to black-
out the clock display. The display will
show
OFF.
If this is the choice you want,
press the
Start
pad.
NOTE:
If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows you to
change the speed. To set the speed you prefer,
follow the steps below.
Press the
Bake
and
Broil Hi/Lo
pads
at the same time for 3 seconds until
the display shows
SF.
Press any
+
pad. The display will
show you a set speed between 1
and 5.
Press any
+
pad to increase the
speed up to the number 5.
Press any
–
pad to decrease the
speed down to the number 1.
Press
Start
to activate the setting and
leave the control set in this special
features mode.
or