THE SELF-CLEANING OVEN
(continued)
Oven for Cleaning
Quick Reminder:
the
SELF CLEAN
2. Press the INCREASE
DECREASE pad
until
desired Clean Time appears.
the
is
hot
you start to set a clean cycle,
word
will appear in the display. Allow
additional time for cooling before you try set
the
NOTE: Only one oven at a time can be self-cleaned.
1. F
O
I1
OW
directions in the Before a Clean
Cycle section.
2. After closing the door, press the AUTO
AUTO SELF
SELF CLEAN pad.
CLEAN
3. Press the INCREASE or DECREASE
until the desired Clean Time
The self-clean cycle will automatically begin after
“Clean” is displayed and the time
the Clean
cycle is set. The words
and “LOCK” will
appear in the display when the door automatically
locks. It will not be possible to open the oven door
until the temperature drops
the lock
temperature and the LOCK
goes off.
4. When the LOCK light is off, open the door.
NOTE:
●
You can find out when the clean cycle
STOP
TIME
will be finished by pressing the STOP
TIME pad.
●
The word “clean”
be displayed, the word
“DOOR” will flash and oven control will
if you set the clean cycle and forget to close the
oven door.
●
A fan may automatically turn on and
to
internal
This is normal and the fan may
continue to run even after the oven is turned off.
displayed.
Clean Time is normally 3 hours. You
can change the Clean Time to any time
—
between 2 and 4 hours, depending on
the amount of soil in your oven.
Stop a Clean Cycle
1. Press the
pad.
CLEAR
OFF
2. When the LOCK light goes off and the oven
has cooled below the locking temperature. open
the door.