GE JK1000 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 89

background image

11

GE Title or job number

11/26/2013

Cycles

Baking and Roasting Modes
Select a mode for baking and roasting based on the
type and quantity of food you are preparing. When
preparing baked goods such as cakes, cookies, and
pastries always preheat the oven first. Uses a combination

of cycling of elements to maintain oven temps.
Traditional Bake
The traditional bake mode is intended for single rack
cooking. This mode uses heat primarily from the lower
element but also from the upper element to cook food.
Convection Bake with Direct Air

*

The Convection Bake mode is intended for single rack
cooking. This mode uses heat from the lower element
and also the upper and rear elements, along with air
movement.
The oven is equipped with AutoRecipe Conversion,
so it is not necessary to convert
the temperature when using this mode. To use this
mode press the Bake pad under Convection, enter
a temperature, and then press Start. Preheating is
generally recommended when using this mode.

Convection Bake Multi Rack mode is intended for
baking on multiple racks at the same time. This mode
uses heat primarily from the rear element but also
heat from the upper and lower elements, along with air
movement from the convection fan to enhance cooking
evenness. Baking time might be slightly longer for multiple racks
than what would be expected for a single rack. To use this mode press
the Bake Multi Rack pad under Convection, enter
a temperature, and then press Start. Always preheat
when using this mode.
Convection Roast with Direct Air *
The Convection Roast mode is intended for roasting
whole cuts of meat on a single rack. This mode uses
heat from the lower, upper, and rear elements along
with air movement directly down from the top of the
oven to improve browning and reduce cooking time. It
is not necessary to convert temperature. Check food
earlier than the recipe suggested time when using this
mode, or use the probe. To use this mode press the
Roast pad under Convection, enter a temperature,
and then press Start. It is not necessary to preheat when using this mode.

«
...
9
10
11
12
13
...
»

Содержание JK1000


























































































Отзывы:

Нет отзывов

Похожие инструкции для JK1000

Бренд: Haier Страницы: 24

Бренд: Cascade Страницы: 10

Бренд: PowerPoint Страницы: 16

Бренд: Premium Appliance Brands Страницы: 10

24" MCD2661EM MicroMat-Duo

Бренд: AEG Electrolux Страницы: 46

Бренд: Everglades Страницы: 52

Бренд: Saturn Страницы: 3

Chambers CMO-2743

Бренд: Maytag Страницы: 32

Бренд: Defy Страницы: 20

Бренд: Fagor Страницы: 82

Бренд: Electrolux Страницы: 44

Бренд: Electrolux Страницы: 28

(KEDO-276SS BL) DOUBLE OVEN

Бренд: KitchenAid Страницы: 39

Бренд: AEG Страницы: 40

Бренд: Singer Страницы: 52

ZEPHAIRE-G PLUS

Бренд: Blodgett Страницы: 2

Бренд: Whirlpool Страницы: 2

Бренд: Whirlpool Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды