GE JGSP32, Инструкция по использованию и уходу, Страница: 14 / 40

CONTROL, CLOCK
Clock
To Set Clink
The clock must set the automatic oven timing
1. Press the CLOCK
functions to
work properly. The time of be
during a Timed Baking or Self-Cleaning cycle.
CLOCK
A
2. Press the INCREASE DECREASE
set the time
Timer
To Set Timer
The timer is minute timer: it
❑
Press TIMER
not
ON/OFF
The maximum setting the timer
is hours
55 minutes.
A
2. Press INCREASE
or DECREASE
to set
amount
time the
timer will automatically
within
releasing
INCREASE DECREASE pad. The
timer, it, will display
seconds until minute is
Then it will display minutes
seconds until minutes reached.
minutes, it will display
now
appears
in display)
minutes until the maximum time
hours 55 minutes is reached.
To Reset Timer To Cancel Timer
If is displayed, press the
INCREASE Press
the
TIMER
ON/OFF until
DECREASE until desired time is reached. word ‘.TIMER”’ disappears from the display.
If “TIMER” is not displayed, press the TIMER
ON/OFF first, then the instructions
set the timer.
End of Cycle Tone
Display Messages
end cycle tone is a series of three beeps
●
If “clean” in the display, DOOR
followed by one beep every six
seconds. If the oven control
signals, set the self-clean
like to the beeps every six seconds,
cycle did shut the door.
press and hold the pad for 10
If in the oven door
To return the that beeps every six seconds,
is in the locked position. BAKE, BROIL COOK
press hold the for 10 seconds.
TIME cannot be set if the door is in the locked
Power Outage
After a power outage, when power is restored, the The display flashes until the clock is reset. other
display will flash and time shown no be functions that were in operation when the went
correct-for example, after a 5-minute power out will have to be programmed again.
interruption the will be 5 minutes
14