![GE JGSP30 Скачать руководство пользователя страница 36](http://html.mh-extra.com/html/ge/jgsp30/jgsp30_use-and-care-manual_2201921036.webp)
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
“F-”
AND
A
FLASH IN
DISPLAY
BURNERS
YELLOW OR
YELLOW-TIPPED FLAMES
SURFACE BURNER
WILL NOT TURN
T(?P BURNERS
NOT LIGHT
TICKING SOUND OF SPARK
AFTER BURNER
I)
FLAMES VERY
FOOD DOES NOT
FOOD DOES
ROAST
BAKE PROPERLY
36
POSSIBLE CAUSE
If the time display flashes “F-” and a
you have a function error code.
Press the
pad.
the
to cool for one
Put the oven
back into operation. If the failure code repeats, disconnect all power to the
range. Call-for service.
tip
blue
for service
for LP gas
for natural gas
burner flames look like
call for service. Normal burner flames should
look like
or (C), depending on the type of gas
use.
●
With LP
some
on
is normal.
To turn from OFF position, push the knob in
then turn.
●
Make sure electrical
is plugged into a live, properly grounded power outlet.
●
Gas
not connected or not turned on.
*Check for power outage.
●
Pan sitting on burner grate may be partially blocking the free air flow needed
for combustion. Remove pan and try again.
●
Igniter orifice in burner body may be clogged. Refer to the Care and
Cleaning section. Remove the obstruction.
●
Burner parts
replaced correctly.
to the Care and Cleaning section.
●
Hole in
top behind igniter may be clogged. Use a small sewing
needle to unplug.
●
Spark igniter not deactivated. Turn burner off arid relight. Some ticking is
normal. If ticking is excessive, call for service.
●
If range is connected to LP gas, check all steps in the Installation Instructions.
●
The oven controls are not properly set. See the Broiling section.
The door is not closed,
*Improper shelf position is being used. See the Broiling section.
●
Food is being cooked on a hot pan.
●
Cookware is not suited for broiling.
Oven
bottom
not securely seated position.
Aluminum foil used on the
rack has
fitted properly and slit,
as recommended.
*The oven controls are
properly set. See the Baking Roasting section.
●
Shelf position is incorrect.
Improper cookware is being used.
*Oven thermostat needs adjustment. See the Adjust the Oven
●
not set correctly.
* Aluminum foil used improperly in the oven.
●
Oven
bottom not securely seated in position.
Содержание JGSP30
Страница 8: ...FEATuMs OF YOUR RANGE i I I 1 I I II I JGSP30 JGSP31 JGSP40 8 ...
Страница 38: ...NOTES 38 ...