Auto Defrosting and Two-Stage Cooking
The oven can be programmed to go automatically
from Auto Defrost into cooking, using the Time Cook
1 and the Time Cook 2 functions.
An automatic holding period is preprogrammed as
part of the defrosting time to ensure complete and
even defrosting before cooking begins.
To program the oven to cook after using Auto
Defrost:
1. Program the oven for Auto Defrost,
following the instructions under the
How to Set Auto Defrost section to
enter food category and weight.
TIME
2. Press the TIME COOK 1 pad, then the
COOK
appropriate number pads to enter the
desired amount of cooking time.
POWER
3. If a power level other than high (HI)
LEVEL
is desired, press the POWER LEVEL
pad, then the appropriate number pad
to enter the power level.
4. If a second cooking stage is required,
press the TIME COOK 2 pad, then the
appropriate number pads to enter the
desired amount of cooking time.
5. If a power level other than high (HI)
LEVEL
is desired, press the POWER LEVEL
pad, the press the appropriate number
pad to enter the power level.
6. Press the START pad.
START
NOTE: The oven will automatically cook on high
(HI) unless a lower power level is selected.
The oven will begin the program by defrosting.
During the defrost stage, the Auto Defrost Indicator
Light will flash in the display and the selected
Category Indicator Light will glow. The Time Cook 1
and the Time Cook 2 indicator lights will glow.
During the first cooking stage, the Time Cook 1
Indicator Light will flash and the Time Cook 2
Indicator Light will glow. During the second cooking
stage, the Time Cook 2 Indicator Light will flash.
AUTOMATIC REHEAT
The Reheat time feature is a time-saving convenience
useful for heating small amounts of food or
beverages. The Reheat time function has six different
preprogrammed reheating times. Press the REHEAT
TIME pad from one to six times or press and hold the
pad to select one of the pre-programmed settings:
10 seconds
press the REHEAT TIME pad once
30 seconds
press the pad twice or press and hold
the pad until “30” appears in the display
1 minute
1 minute,
30 seconds
press the pad three times or press
and hold the pad until “1:00” appears
in the display
press the pad four times or press
and hold the pad until “1:30” appears
in the display
2 minutes
press the pad five times or press
and hold the pad until
appears
in the display
3 minutes
press the pad six times or press
and hold the pad until
appears
in the display
For Example: To set the oven for
minutes on high
(HI) power:
1. Press the REHEAT TIME pad four
times, or press and hold the pad until
“1:00” appears in the display.
2. Press the START pad.
The oven will automatically begin cooking on high
power for the pre-programmed amount of time. The
Time Cook 1 Indicator Light will appear and flash.
When the time has run out, the oven control will beep
four times. The word “END” will appear in the
display and the oven will shut off.
To change the power level after setting either
the Automatic Reheat function, press the
REHEAT TIME pad, then press the POWER
LEVEL pad, and then press the desired number
pad for the new power level.
17
