Proper care and
are important so your range
will give you efficient
and satisfactory service. F
O
11
OW
these directions carefully in
for it to
help assure safe and proper maintenance.
BE SURE
IS
BEFORE
ANY PART
OF
RANGE.
A
range is removed for
servicing or any
be sure anti-tip device is
properly when the range
is replaced.
to
in tipping of
the range and cause injury.
How to Remove the Range for Cleaning and Servicing
Follow these steps to remove the range for servicing
5. Reverse these steps to
the range. If the
or cleaning hard to reach surfaces.
gas line has been disconnected, check for gas leaks
1. Shut off the gas supply to the range.
after reconnection. See the Initiation
2. Disconnect the electrical supply to the range.
for the gas lead test method.
3. Disconnect the gas supply tubing to the range.
A trained technician should make the gas
installation, disconnection and
of the
4. Slide the range forward to free the range foot from
gas supply the appliance.
the Anti-Tip bracket. See the
Instructions for the location of the bracket.
Lift-Up/Off Cooktop
Clean the area under the cooktop often. Built-up soil,
especially grease, may catch on
To make cleaning easier, the cooktop may be
up or off.
Be sure
burners are turned off before raising
the cooktop. Then remove the grates. Grasp the two
front burner wells and
the cooktop up or off. Be
careful of the pilots when the cooktop is up.
After cleaning underneath the cooktop with hot,
soapy water and a clean cloth, lower or replace the
cooktop. Be careful not to pinch your fingers.
To replace the cooktop if you have removed it,
insert
two tabs at the back of the cooktop into slots
at the base of the
Lower
cooktop into place, applying pressure
the tab on the underside snaps into the catch at the top
front center of the range.
19
