Keep your oven clean and sweet-
Don’t use sharp-edged utensils
smelling. Opening the oven door a
on your oven. The inside and
few minutes after cooking helps air
outside oven walls can be scratched.
out the inside. An occasional
The control panel can be damaged.
thorough wiping with a solution of
baking soda and water keeps the
BE CERTAIN POWER IS OFF
BEFORE CLEANING ANY
inside fresh.
PART OF THIS OVEN.
How to Clean the Inside
Walls and floor. Some spatters can be removed
with a paper towel, others may require a damp cloth.
Remove greasy spatters with a
cloth, then rinse
with a damp cloth. Do not use abrasive cleaners on
oven walls. NEVER USE A COMMERCIAL OVEN
CLEANER ON ANY PART OF YOUR
MICROWAVE OVEN.
Door (inside). Window: Wipe up spatters daily
and wash when soiled with a damp cloth. Rinse
thoroughly and dry.
Metal and plastic parts on door: Wipe frequently
with a damp
to remove all soil. DO NOT USE
ABRASIVES, SUCH AS CLEANING POWDERS
OR STEEL AND PLASTIC PADS. THEY WILL
DAMAGE THE SURFACE.
Removable
and Turntable Support.
Occasionally it is necessary to remove the turntable
and support for cleaning of the oven floor or
turntable. To prevent breakage, do not place the
turntable into water just after cooking. Wash it
carefully in warm,
water or in the dishwasher.
The turntable and support can be broken if dropped.
Remember, do not operate the oven without the
turntable and support in place.
Special note when using Brown ‘N Sear Dish: If
grease is present, high heat generated on bottom of
a Brown ‘N Sear dish may cause the grease to burn
onto the oven tray. This may be removed with a
cleanser such as Bon
brand cleanser.
After using Bon
brand cleanser, rinse and dry
thoroughly, following instructions on can. Do not use
Bon
brand cleanser on the painted surfaces such
as the walls. It may scratch the paint.
How to Clean the Outside
Case. Clean the outside of your oven with soap and
damp cloth, rinse with a damp cloth and then dry.
Wipe the window clean with a damp cloth. Chrome
trim is best wiped with a damp cloth and then with a
dry
Control Panel. Wipe with a damp cloth. Dry
thoroughly. Do not use cleaning sprays,
amounts
of soap and water, abrasives or sharp objects on the
panel—they can damage it.
Door Surface. When cleaning surfaces of door and
oven that come together on closing the door, use only
non-abrasive soaps or detergents applied with a
sponge or soft cloth.
Power Cord. If the cord becomes soiled, unplug and
wash with a damp cloth. For stubborn spots,
water may be used, but be certain to rinse with a
damp cloth and
thoroughly before plugging cord
into outlet.
24
