23
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting T
ips
Safety Instructions
Customer Service
This appliance is manufactured with a
neutral (white) power supply wire and a
cabinet-connected green (or bare copper)
grounding wire.
Connect the appliance cable to the junction box
through the U.L.-listed conduit connector.
Complete electrical connection according to local
codes and ordinances. (For preferred junction
box location, see Step 1.)
NOTE: Do not use a power cord kit for connection
to electrical supply.
WARNING:
IMPROPER
CONNECTION OF ALUMINUM HOUSE WIRING TO
COPPER LEADS CAN RESULT IN A SHORT
CIRCUIT OR FIRE. USE ONLY CONNECTORS
DESIGNED FOR JOINING COPPER TO
ALUMINUM, AND FOLLOW THE
MANUFACTURER’S RECOMMENDED
PROCEDURE CLOSELY.
NOTE TO ELECTRICIAN:
The armored
cable leads supplied with this appliance are
UL-recognized for connection to larger gauge
household wiring. The insulation of the leads
is rated at temperatures much higher than the
temperature rating of household wiring. The
current carrying capacity of the conductor is
governed by the temperature rating of the
insulation around the wire, rather than the
wire gauge alone.
Prepare for Electrical Connection
Where local codes permit connecting the
cabinet-grounding conductor to the neutral
(white) junction box wire (see illustration below):
A. Disconnect the power supply.
B. Connect together the 3 wires: bare copper and
white appliance cable wires and the neutral
(white) wire in the junction box.
C. Connect the 2 black wires together, then the
two red wires together.
When connecting to a 4-wire electrical system,
when installing in a mobile home, or when local
codes DO NOT permit connecting the cabinet-
grounding conductor to the neutral (white)
junction box wire (see illustration below):
A. Disconnect the power supply.
B. Separate the bare copper and white wires.
C. Connect the white appliance cable wire to the
neutral (white) wire in the junction box.
D. Connect the 2 black wires together, then the
two red wires together.
E. Connect the grounding wire (bare copper) to
the grounding wire in the junction box.
Electrical Connection
GROUNDED NEUTRAL
4-WIRE ELECTRICAL SYSTEM
Cable from
Power Supply
Red
Wires
White
Wires
Bare Wire
Junction
Box
Black
Wires
U.L.-listed
Conduit
Connector
Cable from
Range
Cable from
Power Supply
Red
Wires
White
Wires
Bare Wires
Junction
Box
Black
Wires
Cable from
Range
U.L.-listed
Conduit
Connector
Read these instructions completely and carefully.