GE JD966, Техническое обслуживание руководство

Страница: 37 / 52

35
3. Remove the 5 screws from the top inside edge
of the control panel frame.
4. Open the door and remove the 6 screws under
the control panel.
5. Remove the 2 screws at the front corners of
the burner box.
6. Slide the burner box forward. Remove the
burner box and set it top side down on a
protected surface.
Burner Removal
1. Remove Burner Box (see procedure).
2. Remove the 3 screws and the bottom pan
from the burner box.
GEA01093
Screws Screws Screws
3. Note the position of the wiring and disconnect
from the burner terminals.
mt er mi nal s.
GEA01094
Screws Screws Screws
Mounting Mounting
Clips
Mounting
Clips
4. Mark the numbers nearest the mounting clips
for reassembly of the new heating element and
remove the screws and clips securing the
burner. Remove the burner.
HOT SURFACE Light Removal
1. Lift up on the 3-wire side of the HOT
SURFACE light unit.
2. Slide the unit toward the 3-wire side and
remove.
Cooling Fan Removal
1. Remove the burner box (see procedure).
GEA01096
Screws Screws
Wiring Wiring
2. Disconnect the wiring from the fan motor.
3. Use pliers to remove the plastic insulation
fasteners from the sides of the fan housing.
4. Remove the 4 mounting screws and the fan.
Plastic Clips