manualshive.com logo in svg

GE JD966, Техническое обслуживание руководство

Поделиться
Скачать
GE JD966 Скачать руководство пользователя страница 32

30

WARNING: 

Before servicing the range, power

must be removed from the range by turning the
power off at the circuit breaker.

Door Removal

WARNING:

 Make sure the oven is completely

cool.

1.   Open the door approximately 6 in. until the

door stops at the broil stop position.

Caution:

 Do not lift the door by the handle. Lifting

the door by the handle may cause the door glass
to break.

2.   Grasp the door firmly on both sides and, with a

steady even motion, lift the door up and off the
hinges.

Convection Element and Fan Guard
Removal

1.   Remove the 4 screws that secure the

convection fan guard to the rear wall of the
oven and remove the fan guard.

GEA01072

Screws

Screws

Screws

Screws

Screws

Convection

Element

Convection

Element

2.   Remove 1 screw from the mounting bracket on

the bottom of the convection element and 2
screws that secure the convection element to
the rear wall of the oven.

3.   Carefully pull the convection element forward

to accesss the wiring harness connectors,
remove the connectors from the element
terminals, and remove the element.

Bake Element Removal

1.   Remove the oven door (see procedure).

2.   Remove the convection fan guard (see
      procedure).

3.   Remove the bake element cover by sliding it

forward until it can be removed from the oven.

GEA01075

Bottom

Panel

Tab

Back

Panel

Screws

Screws

GEA01073

Содержание JD966





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды