GE JCKS06, Руководство пользователя

Страница: 5 / 40

Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the
CLEAR/OFF pad is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Press the KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continuous beep). Press the
KITCHEN TIMER ON/OFF
pad
again. The display shows BEEP.
(This cancels the one beep every
6 seconds.)
Press the START pad.
5
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Special features of your oven control.
www.geappliances.ca
Your new touch pad control has additional features that you may choose to use. The following are the
features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They
remain in the control’s memory until the steps are repeated.
When the display shows your choice, press the
START pad. The special features will remain in
memory after a power failure.
12-Hour Shutoff
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn off this feature, follow
the steps below.
Press the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Press the DELAY START pad until no
shdn (no shutoff) appears in the
display.
Press the
START
pad to activate the
no shutoff and leave the control set
in this special features mode.
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change
this to use the Centigrade selections.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Press the
BROIL HI/LO
and
COOKING
TIME
pads at the same time. The
display will show F (Fahrenheit).
Press the
BROIL HI/LO
and
COOKING TIME
pads again at the
same time. The display will show
C (Centigrade).
Press the START pad.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
the cooking function is finished.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking and roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed Cook
and Hold will automatically start.
To activate this feature, follow the steps
below.
Press the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Press the
COOKING TIME
pad. The
display will show
Hld OFF.
Press the
COOKING TIME
pad again
to activate the feature. The display
will show
Hld ON.
Press the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.