7
Using the surface units.
ge.com
Throughout this manual, features and appearance may vary from your model.
Operating
Instructions
Car
e
and
Cleaning
Installation
Instructions
Tr
oubleshooting
Tips
Safety
Instructions
Consumer
S
uppor
t
Be sure you turn the control knob
to Off when you finish cooking.
How to Set
Indicator Lights
(on radiant glass models only)
A
HOT SURFACE
or
HOT COOKTOP
(depending on model) indicator light will glow
when any radiant element is turned on and
will remain on until the surface is cool
enough to touch.
A
SURFACE UNIT
on or
BURNER ON
(depending on model) indicator light will glow
when any surface unit is on.
NOTE:
The
SURFACE UNIT
or
BURNER ON
indicator light may glow between the surface
control settings of
Lo
and
Off
, but there is no
power to the surface units.
Push the knob in and turn in either direction
to the setting you want.
At both
Off
and
Hi
the control
clicks
into position. You may hear slight
clicking
sounds during cooking, indicating the control
is keeping the power level you set
.