Operating
Instructions
Safety Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting T
ips
Consumer Support
28
Painted surfaces include the sides of the
range and the sides of the door trim.
To clean the painted surfaces, use a hot,
damp cloth with a mild detergent suitable
for these surfaces. Use a clean, hot, damp
cloth to remove soap. Dry with a dry, clean
cloth.
Do not use steel-wood pads, commercial
oven cleaners, cleaning powders or other
abrasive cleaners. They will damage the
surface.
Painted Surfaces
(on some models)
On glass cooktop models, the oven is vented
through an opening at the rear of the
cooktop.
On coil cooktop models, the oven is vented
through an opening under the right rear
surface unit.
Never cover the opening with aluminum foil or
any other material.
Oven Vent
To clean the outside glass finish, use a glass
cleaner. Rinse and polish with a dry cloth.
Glass Window
(on some models)
Care and cleaning of the range.
Stainless Steel Surfaces
(on some models)
Do not use a steel-wool pad; it will scratch
the surface.
Shake bottle well.
Place a small amount of CERAMA
BRYTE
®
Stainless Steel Appliance
Cleaner on a
damp
cloth or
damp
paper towel.
Clean a small area (approximately
8
″
x 8
″
), rubbing with the grain of the
stainless steel if applicable.
Dry and buff with a clean, dry paper
towel or soft cloth.
Repeat as necessary.
NOTE:
If a mineral oil-based stainless steel
appliance cleaner has been used before
to clean the appliance, wash the surface
with dishwashing liquid and water prior
to using the CERAMA BRYTE
®
Stainless
Steel Appliance Cleaner. After washing
the surface with dishwashing liquid
and water, use a generous amount
of CERAMA BRYTE
®
Stainless Steel
Appliance Cleaner to clean the appliance.
To Order
To order CERAMA BRYTE
®
Stainless
Steel Appliance Cleaner, please call our
toll-free number:
National Parts Center
800.626.2002
www.GEAppliances.com
CERAMA BRYTE
®
Stainless Steel Appliance
Cleaner
. . . . . . . . . . . . . . . . . . . . .# PM10X311
