Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode
³
you can change the
oven temperature at this point. Glows when the
oven is in bake mode.
START/ON Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-
cleaning mode and the times set for the timer or
automatic oven operations. The display will show
PRE while preheating. When the oven reaches the
selected temperature, the oven control will beep
and the display will show the oven temperature.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
If the function error code appears during the self-
cleaning cycle, check the oven door latch. The latch
handle may have been moved, even if only slightly, from
the latched position. Make sure the latch is moved to the
right as far as it will go.
Touch the CLEAR/OFF pad. Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to the
range and call for service.
KITCHEN TIMER ON/OFF or
TIMER ON/OFF pad
Touch this pad to select the timer feature.
Then touch the + and – pads to adjust the timer.
TIMER Light
Flashes while in edit mode
³
you can change the set
time at this point. Glows when the timer has been
activated. Flashes again when the time has run out
until the control is reset.
CLOCK Pad
To set the clock, press this pad twice and then
press the + and – pads. The time of day will flash
in the display when the oven is first turned on.
START TIME ON/OFF Pad (on some models)
Use along with the
COOKING TIME ON/OFF
or
SELF CLEAN
pads to set the oven to start and
stop automatically at a time you set.
Start Time Light
Flashes while in edit mode
³
you can change the
start time at this point. Glows when the function
has been activated.
COOKING TIME ON/OFF Pad (on some models)
Touch this pad and then touch the + or – pads
to set the amount of time you want your food
to cook. The oven will shut off when the cooking
time has run out.
COOKING TIME Light
Flashes while in edit mode
³
you can change the
set time at this point. Glows when the function has
been activated. Flashes again when the time has
run out until the control is reset.
Throughout this manual, features and appearance may vary from your model.
Using the oven controls.
(on some models)
GEAppliances.com
or
or
9
Содержание JB600
