GE JB600, Инструкция по использованию и уходу

Страница: 32 / 80

Troubleshooting Tips
Before you call for service…
Problem Possible Causes What To Do
2YHQ³$OO0RGHOV
Oven light does not work Light bulb is loose or defective. ‡ Tighten or replace the bulb.
Switch operating light is broken. ‡ Call for service.
Oven will not work Plug on range is not completely ‡ Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet. grounded outlet.
A fuse in your home may ‡ Replace fuse or reset circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set. ‡ See the Using the oven section.
On self-cleaning models, door ‡ If necessary, allow the oven to cool then unlock the door.
left in the locked position.
Food does not bake Oven controls improperly set. ‡ See the Using the oven section.
or roast properly
Rack position is incorrect or the ‡ See the Using the oven section.
rack is not level.
Incorrect cookware or cookware ‡ See the Using the oven section.
of improper size being used.
Oven thermostat needs ‡ See the Adjust the oven thermostat–Easy to do yourself!
adjustment. section.
Food does not Oven is not set to BROIL. ‡ On models with a temperature knob, make sure you turn
broil properly it all the way to the BROIL position. On models with a
BROIL HI/LO pad, make sure it is turned on.
Improper rack position being used. ‡ See the Broiling guide .
Food being cooked in a hot pan. ‡ For best results, use a pan designed for broiling.
Make sure it is cool.
Cookware not suited for broiling. ‡ For best results, use a pan designed for broiling.
In some areas the power ‡ Preheat the broil element for 10 minutes.
(voltage) may be low.
‡ Broil for the longest period of time recommended in
the Broiling guide.
Control signals after You forgot to enter a bake ‡ Press the BAKE pad and desired temperature or the
entering cooking time temperature or cleaning time. SELF CLEAN pad and desired clean time.
or delay start
Display flashes “bAd” The installed connection ‡ Contact installer or electrician to correct miswire.
then “linE” with a from the house to the unit
loud tone is miswired.
Warming drawer will A fuse in your home may be ‡ Replace the fuse or reset the circuit breaker.
not work blown or the circuit breaker
tripped.
The oven is self-cleaning. ‡ Wait for the self-clean cycle to finish and the oven to cool.
Controls improperly set. ‡ See the Using the warming drawer section.
32