GE IC754VSI06SKD, Руководство пользователя

Страница: 52 / 78

D e t a i l e d O p e r a t i o n
CF Port
44
6" QuickPanel View Keypad GFK-2357A
3
C F P O R T
To enhance the QuickPanel View Keypad’s capabilities with additional flash
memory, the unit is equipped with a CF (Compact Flash) Type 2 port on its side.
A CF card is inserted in this port with the card’s front facing the back of the unit
(the narrow side slot on the card should be toward the bottom).
Note: For full protection from electrostatic discharge, peel off the paper label on
the side of the CF card facing the bezel to allow contact between the card and the
internal frame ground contacts on the CF connector.
The card should slide in easily—to avoid damage, do not force it.
The Copy Project to Flash Card utility (see page 19) lets you transfer Proficy
Machine Edition projects between QuickPanel View Keypad units via CF Cards.
No Compact Flash cards are supplied with the QuickPanel View Keypad. A list of
cards (and other devices) that have been tested and are compatible can be found
by visiting
http://www.ge-ip.com/support
, then select the Operator Interface
category, then select the QuickPanel View product name.
The CF port in the QuickPanel View supports only 3.3v CF cards. 5v CF cards are
not supported.
Caution: Do not remove power while the system is writing to the CF card, such as
when copying a Proficy Machine Edition project. Removing power while writing
may lead to data loss and file or CF card corruption. To ensure the system
completes writing to flash and closes all files, see “Shutdown” on page 4.
Compact Flash Port
Right Side