GE HygroTrace, Руководство пользователя

Страница: 34 / 40

HygroTrace Moisture Transmitter 29
September 2007
Appendix
The
Diagnostics
and
Service
menus are intended for factory-
trained personnel only, and access is limited by requiring a
service passcode. These menus allow the factory default data,
including calibration data and sensor parameters, to be adjusted.
Please contact an applications or service engineer at GE Sensing
if access to these menus is required. Normal operation of the
HygroTrace
does not require access to the information contained
in these menus.
Diagnostics
A Diagnostics Display page can be selected from the
Display
Menu
(see Figure 11 below), but can be accessed only by using
the service passcode.
Figure 11: Diagnostics Display
Menu: x
H:+1.234567 60.2°C
ppb
N: 85 R :0.855
M:+1.195886e–05
100
2
Heater
Temperature
Hygrometry
Voltage
Number
Samples
Slope
of Fitted Line
Correlation
of Fitted Line
Control Status
= Heating
= Cooling
... = Holding at Temp.
+ = Acquiring Data
= = Calculating Result
Calculated
Result
Service Mode
Indicator
of Data
Coefficient