TRANSFER FRESH FOOD DOOR
STOP TO THE LEFT
Remove the door stop from the bottom of the right
side of the door. Transfer the plug buttons from the
bottom left side to the right side, if applicable.
Install the door stop on the left side.
NOTE:
The door stop appearance may vary by model.
Always face the flange toward the front of the door.
6
Front of door
ATTACH FRESH FOOD DOOR
HANDLE TO THE RIGHT
If applicable, remove the
plug button from the left
edge of the door and insert
it into the hole on the
opposite side.
For models without
handles, skip to Step 9.
A. Models with plug buttons:
Remove the plug buttons
from the right edge of the
door top and insert them into
the handle screw holes on
the left side.
Carefully remove the
button on the door by
prying under the edge with
a putty knife and transfer
to the opposite side.
Install handle:
Install the
handle on the other side
of the door.
7
REMOVE FRESH FOOD DOOR
HANDLE FROM THE LEFT SIDE
For models with handles:
Remove the front plug
button by carefully prying under the edge with a putty
knife. Remove the exposed screw holding the handle.
Remove the two screws holding the handle to the top
of the door.
On models with filler blocks, handle must be pulled
straight out away from the door to remove.
5
Plug
button
Handle bottom
Handle top
Screws for
handle holes
Plug button
Installation Instructions
TRANSFER BOTTOM HINGE
TO THE LEFT
To access the bottom hinge, move the refrigerator
so it is 30
″
from a wall. Then carefully tip the
refrigerator back until it rests against the wall.
CAUTION:
Be sure that the coils
on the back of the refrigerator do not rest against
the wall. Doing so could damage the coils.
Remove the screws (some models have washers
with each screw), leveling leg and bottom hinge from
the right side. Remove the leveling leg from the left side
of the cabinet and install it in the right side.
Reassemble the bottom hinge on the left side.
NOTE: The leveling legs are not interchangeable.
4
11
30
″
Pull
straight
out
Front of door
Flange
Plug button
Plug
button
location
Plug
button
location
