background image

ATTACH FREEZER DOOR HANDLE 
TO THE RIGHT

Carefully remove the 
button on the top of 
the door by prying under the
edge with a putty knife and
transfer to the opposite side.

For models with handles: 

Carefully remove the 
button on the front of the
door by prying under the
edge with a putty knife and
transfer to the opposite side.

For models with filler blocks:

Remove the screws from the
filler block on the underside
of the door and pull the
block forward. Insert the filler
block into the slot on the
opposite side where the
handle was removed and
replace the screws. Slide the
handle into the track on the
underside of the door where
the filler block was removed
and install the screws.

Install the screw and
nameplate plug button.

10

REMOVE FREEZER DOOR HANDLE
FROM THE LEFT

For models with handles:

Remove the nameplate 
plug button by carefully 
prying under the edge with a putty
knife. Remove the exposed screw
holding the handle.

Remove the two screws holding 
the handle to the bottom of the 
door and remove the handle.

On models with filler blocks, 
the handle must be pulled straight 
out away from the door to remove.

8

Handle bottom

Installation Instructions

REVERSING THE DOOR SWING 

(CONT.)

12

Nameplate
plug button

Handle top

Plug button

TRANSFER FREEZER DOOR STOP 
TO THE LEFT

Remove the door stop from the bottom of the right
side of the door. Transfer the plug buttons from the
bottom left side to the right side, if applicable. 

Install the door stop on the left side.

NOTE:

The door stop appearance may vary by model.

Always face flange toward the front of the door.

For models without handles, skip to Step 11.

9

ATTACH FRESH FOOD DOOR
HANDLE TO THE RIGHT 

(CONT.)

B. Models with filler block: 

Remove the screws from 
the filler block on the right
side of the door and pull 
the block forward. Insert 
the filler block into the slot
on the opposite side where
the handle was removed and replace the screws.

Carefully remove the
button on the door by
prying under the edge with
a putty knife and transfer
to the opposite side.

Install handle: 

Install the

handle on the other side 
of the door by sliding the
handle into the slot.

7

Filler block

Plug button

Screws

Pull
straight
out

Slide 
straight in

Front of door

Front of door

Flange

Plug button

Plug
button
location

Plug
button
location

Filler block

Screws

Содержание GTS12BBPLCC





















Отзывы: