12
49-1000399 Rev. 1
Installation Instructions
Electrical Connection
/RQJOHQJWKVIRU'&YROWDJHVXSSO\OLQHVFRPELQHGZLWKVPDOOJDXJHZLULQJFDQOHDG
to excessive voltage drop at the refrigerator connection which decreases the cooling
performance of the refrigerator, and cause the wires to overheat possibly causing a
ILUH7KHEHORZVXSSO\ZLUHVL]HLVUHFRPPHQGHG
• Before beginning the installation, disconnect power by removing refrigerator circuit
IXVHRUWXUQLQJRIIFLUFXLWEUHDNHULQWKH'&YROWDJHGLVWULEXWLRQSDQHO
• Turn the control knob to the OFF position.
• Locate and remove the seven screws of the lower rear unit cover as indicated using
a Phillips screwdriver.
• Locate the power supply connection terminal block on the left side of the compressor
compartment.
WARNING
ELECTRICAL SHOCK HAZARD
Failure to follow these instructions can result in death,fire, or electric shock.
Supply
Wire Size
Maximum Supply
Line Length
12 AWG
)7
$:*
)7
8 AWG
)7
Power Supply
Connection
Terminal Block
Connect
Supply Wires
Install Strain
Relief Clip
Power Input:
DC12V (10.8-14V)
Current: 20A MAX
+
-
GND
