Leveling legs
Bottom
hinge
Plug
button
Spacer
Hinge
cover
Plug buttons
or screws
Hinge
Door Reversal (on some models)
1 . Remove the small plug button on the left
side of the door top cap .
2 . Remove the 2 plug buttons or screws on
the left side on top of the cabinet .
3 . Remove the plastic hinge cover by lifting
it up by the front edge .
4 . Remove the 2 screws from the top hinge .
5 . Lift the door up and off the bottom hinge
(right side) .
6 . Tilt the refrigerator cabinet back to
remove the left leveling leg .
7 . Remove the screws on the bottom hinge
(right side) and remove the leveling leg .
Move the bottom hinge to the left side
and secure it with screws . Re-install the
leveling legs .
IMPORTANT:
The left leg has a spacer or
spacer feature that must be moved to the
right side leveling leg when the door swing
is reversed.
8 . Screw the right leveling leg, with the
spacer, back in place on the right side .
9 . Position the door on the left bottom
hinge . With the magnetic gasket holding
the door in place, secure the top hinge
with screws .
10 .
Make sure the door is aligned with the
refrigerator cabinet before continuing.
11 . Replace the hinge cover on top of the
hinge .
12 . Put the plug button in the hole on the
right side of the door cap .
13 . Put the 2 plug buttons on the right side
on top of the cabinet
8
Installation Instructions
POWER CORD
• Plug the refrigerator power cord into its own properly grounded wall outlet with a voltage rating matching that on the
refrigerator rating plate .
• Do not use an extension cord .
• Read all safety precautions on pages 2 and 3 .
WARNING
Explosion Hazard.
Keep flammable materials and vapors, such as gasoline, away from refrigerator . Failure to do so can
result in fire, explosion, or death .
CONNECTING ELECTRICITY
WARNING
Electrical Shock Hazard.
Plug into a grounded 3-prong outlet
Do not remove the ground prong
Do not use an adapter
Failure to follow these instructions can result in death, fire, or electrical shock .