manualshive.com logo in svg

GE Giraffe Blue Spot PT Lite, Руководство по эксплуатации, техническому обслуживанию и ремонту

Поделиться
Скачать
GE Giraffe Blue Spot PT Lite Скачать руководство пользователя страница 25

3.1.5 

Product storage

It is recommended to leave the light pipe attached to the light box during product storage. If the light 

pipe is detached from the light box for storage, the protective caps of the light pipe and the light pipe 

port (originally supplied with the system shall be applied to the the light pipe and the port to protect the 

therapeutic-light LED and fiber against dust and dirt. 

CAUTION: 

Do not fold the light pipe or bend it tighter than 60 degrees to avoid light pipe damage.

3.2 

Options

Portable Roll Stand ....................................................................6600-0894-216

GE Healthcare BiliBlanket Meter II ......................................6600-0198-900 

NOTE:

 Use only GE approved optional parts with the device.

 

 25

Chapter 3: Operator’s Maintenance

Содержание Giraffe Blue Spot PT Lite

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды