4
Installation of Push button on the fascia:
13. Remove the existing dummy button by
removing the screw as shown in fig 10.
Figure 10. Connector plug assembly
14. Insert the push button and the spring from the
front of the fascia. Assemble them to the fascia
with the screw & washer as shown in fig 11.
Fig 11. Push button assembly
15
. Rotate the charging handle down and slide
the front cover over the handle to assemble the
front cover to housing as shown in Fig. 12.
Figure 12.
16. Ensure the fascia is aligned properly with the
trip unit and the pad lock features of the breaker.
17. Fasten the 6 mounting screws of fascia with
the housing using a pozidrive screwdriver. Apply
torque of 6 Nm (4.42ft-lbs).
Dummy button
Screw
